Tech dive gear is necessary to reach deeper depths in the underwater world. These specialty gears have features that are not available in recreational diving equipment. These include sidemount and backplate BCDs. Advanced regulators and tanks are necessary for technical diving. This article will show you what to look out for in gear that suits your needs.
Equipment for technical diving
Tech diving gear can be modified to suit your specific needs. The basic parts of a tech BCD are a steel or aluminum backplate, harness, and air bladder. D-Rings and other components can be added to the harness to make it fit your body. There are many options for wings. They come in different sizes and configurations. You can use one tank to make your gear.
Types
There are many differences between recreational and technical diving equipment, and the equipment for each is specific to the type of diving. Tech divers will often require special backplates/wings or sidemount BCDs, while recreational divers might use a standard BCD. They also need advanced tanks, regulators, and computers. This article will explore the differences between the two types of gear and what you should look for in your technical diving equipment. You will be able to make an informed decision about the gear that is best for you.
Configuration of gear
The configuration of tech dive gear varies from recreational diving, as technical divers deal with different conditions. Despite the differences in the configuration of tech dive gear, they all serve the same purpose: to keep the diver comfortable during the dive. Listed below are some tips on tech dive gear configuration. Keep in mind that the configuration of the gear should be simple yet highly effective. For example, a good regulator will have a high performance rating. When diving deep, the density of gas increases, so the equipment should be well-made to cope with this change.
Computers
The most advanced tech diving computers are equipped with larger displays and HD screens. They also have advanced features for technical dives. They can be used for all kinds diving, from technical to recreational. Some models even have hoseless air integration, digital compasses, and GPS features. All of this information is critical for safety. Diving computers can become inaccurate if they don’t calculate certain decompression factors.
For cold-water divers, thermal protection
Special Operations Forces personnel are often equipped with neoprene, which allows them to conduct training and operations. These suit provide only a limited amount of insulation when at the surface, and only about 1/4 of the total insulation when they are at 100 feet depth. New wetsuits have been developed with R-values in single digits to solve this problem. These suits will reduce thermal bridge by using innovative multi-layer constructions and stop-gap material.
Rebreathers
You've likely wondered what the differences are between traditional regulators and rebreathers if you have made the decision to switch from open circuit to scuba gear. Rebreathers require more maintenance and diving time than their open circuit counterparts, and they have more potential ways to cause you harm. Before you buy a rebreather, make sure to research the benefits.
Sidemount BCDs
The STEALTH 2.0 sidemount BCD was the first to be designed for technical divers. This backmount harness is equipped with an integral TEC wing which gives you extra safety when diving deep and during decompression. Manufacturers also offer a bottom-mounted low-pressure inflation hose. The STEALTH 2.0 can be purchased in single-tank, double-tank or dual-tank configurations.