Wreck diving is often associated with recreational diving and exploring shipwrecks. Although wrecks are the most common site for wreck diving, there is a growing trend to scrape old ships to make artificial reef sites. For more information on wreck diving, please read the following. Here are some essential tips to get you started. First, get your equipment ready! There are many kinds of equipment. The right equipment can make the difference between a safe and dangerous dive.
NON-PENETRATION WRECK DIVING
There are some things that you should know if you're new to scuba diving or want to learn more about non-penetration dives. First, wrecks are often a place to fish, so divers should be aware of any lines or fishing nets. They may also find themselves in dangerous terrain with sharp edges. Additionally, currents can push them away from the places they want. Non-penetration wreck diving, while not advised, is an alternative.
Although it might sound easier, technical penetration diving has its own set of hazards. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. The presence of silt and/or mud in wrecks can also make orientation difficult and severely affect visibility. These dangers can be avoided by non-penetration dives. The diver must stay within the light zone, and only move to the exit point.
Viewing a sunken shipwreck
A survey of a sunken wreck requires special equipment, as well as a deep understanding of maritime history. The survey method used depends on how accurate and time-consuming it is. It may include a GPS position fix or a tape baseline. Or offset and ties measurements. Sonar and other non-destructive techniques can all be used to survey a sunken shipwreck.
A shipwreck survey's objective is to locate the vessel and determine its exact location. It should also include information about navigational hazards and environmental conditions. A summary of the vessel's structure, the incident that caused it to sink, and any previous archeological surveys should be included in the survey report. It should also be possible to plot the location on a nautical map in order to take precise measurements.
Equipment necessary
You should be familiar with the shipwreck before you dive it. Be familiar with its layout, key features, and hazards. These details will assist you in preparing for your dive. Below you'll find the information you need to dive in a shipwreck. Before you dive, be sure to go through the checklist.
Proper buoyancy control is essential to avoid losing your way in the dark. For wreck diving, you need to have good buoyancy control. Deep water diving is dangerous without a weight belt and a buoyancy tank. However, if you're looking to have a fun dive, a weight belt and a scuba regulator are essential. These two pieces of equipment will ensure that you and others are safe.