The term wreck diver is usually associated with recreational diving, exploring shipwrecks. Wreck diving is still a popular activity, with shipwrecks being the main site. However, it is becoming more common to use retired ships to create artificial coral reefs. Read on to learn more about the art of wreck diving. These are some important tips to get you started in wreck diving. First, get your equipment ready! There are many types of equipment. You can make the difference of a fun or dangerous dive by choosing the right gear.
Divers who are not looking for penetration should not dive in wrecks
There are some things that you should know if you're new to scuba diving or want to learn more about non-penetration dives. First, wrecks can be used as a fishing spot, so divers need to be aware of lines and nets. You should also be aware that the terrain underneath can have sharp edges. The currents can carry divers away from what they are looking for. Non-penetration wreck diving, while not advised, is an alternative.
Technical penetration diving is not as easy as it sounds. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. Silt and mud can cause visibility problems and make orientation extremely difficult. To avoid these dangers, non-penetration wreck diving requires that the diver stay within the light zone and move to an exit point.
A view of a sunken ruin
To survey a sunken ruin, in addition to traditional surveys and knowledge of the maritime history of this area, you will need specific equipment. Depending on your time and requirements, you may use a combination GPS position fix, tape baseline, or offset with ties measurements. Sonar and other non-destructive techniques can all be used to survey a sunken shipwreck.
The objective of a shipwreck survey is to identify the vessel and its location. It should identify navigational hazards as well as environmental conditions. Historical events are also included. The survey report should include a summary of the vessel's structural features, the incident that sank it, and any prior archeological surveys. Finally, it should be possible to plot the site on a nautical chart in order to make accurate measurements.
Equipment required
You should be familiar with the shipwreck before you dive it. Learn about the layout of the wreck, its key points and potential hazards. These things will help you prepare for your dive, and reduce the chance of an accident. You'll find information about all the equipment required to dive a shipwreck. Before you dive, be sure to go through the checklist.
Proper buoyancy control will ensure you don't lose your way in darkness. Proper buoyancy control is crucial for wreck diving. Without a buoyancy control tank or weight belt, it is not recommended that you dive deep in water. You will have a lot of fun diving if you have a weight belt. These two pieces of equipment will ensure that you and others are safe.