Wreck diving is often associated with recreational diving and exploring shipwrecks. Although wrecks are the most common site for wreck diving, there is a growing trend to scrape old ships to make artificial reef sites. Read on to learn more about the art of wreck diving. Here are some key tips to help get you started. First, get your equipment ready! There are many different types of equipment. Getting the right kind of gear can make the difference between a fun and dangerous dive.
Wreck diving that is not pierced
There are some things that you should know if you're new to scuba diving or want to learn more about non-penetration dives. First, wrecks are often places to fish. Divers need to be aware if there are lines or nets. The underlying terrain may have sharp edges, and currents could transport them from the place they want. Non-penetration wreck diving, while not advised, is an alternative.
It may sound simpler, but technical penetration diving can pose a lot of dangers. The dangers of diving in the light zone include overhead hazards, proximity to the wreck structure, and the possibility of getting caught in tight passageways. Silt and mud can cause visibility problems and make orientation extremely difficult. Non-penetration wreck diving allows the diver to stay within the zone of light and move to an exit point.
Surveying a sunken wreck
To survey a sunken ruin, in addition to traditional surveys and knowledge of the maritime history of this area, you will need specific equipment. Depending on your time and requirements, you may use a combination GPS position fix, tape baseline, or offset with ties measurements. A variety of techniques are available to survey a sunken ruin, including sonar and non-destructive methods.
A shipwreck investigation is designed to identify and locate the ship. It should also identify navigational hazards, environmental conditions, and historical events. A summary of the vessel's structure, the incident that caused it to sink, and any previous archeological surveys should be included in the survey report. In order to accurately measure the site, it should also be possible for the site to be plotted on a nautical charts.
Equipment required
Know everything you can about a shipwreck. Learn about the layout of the wreck, its key points and potential hazards. Knowing these things will help you prepare for your dive and minimize the chances of an accident. Below you'll find the information you need to dive in a shipwreck. This checklist should be read before you dive.
Proper buoyancy control is crucial to not lose your way in the darkness. For wreck diving, you need to have good buoyancy control. You shouldn't dive in deep waters without a weight belt or a buoyancy controller tank. You will have a lot of fun diving if you have a weight belt. These two pieces ensure safety for you and your fellow divers.